Horner APG XLt OCS HE-GSM04 - Manual (Page 12)

PAGE 12 GPRS / GSM MODEM Configuration MAN4005-04-EN
2.2 Connectivity with Cscape
•
GPRS configuration must be downloaded into the OCS.
•
Configure Sever/Client IP address in the OCS Main Menu -> Dflt Pgm Port -> GPRS
•
This is valid for port MJ1 only.
•
Select the default programming port as GPRS in the System Menu.
•
The connectivity with Cscape over GPRS can be established only when the modem is configured in server mode.
•
Open the Add Target dialog by selecting Tools| Editor Options | Communications Port and then click
from the Main Menu.
•
rt (COMM Ports) and GPRS mode. Select Ethernet as the communications po
•
Specify modem IP address and timeout.
The communication timeout for Cscape should be increased to take care of the GPRS latency (typically 30 to 40
•
•
lue Definitions
seconds).
The status of the connection will be updated in CsCAN Status Register specified in the GSM/GPRS/SMS
Configuration window. Various status values are described in the
Section 4.3 Modem Status Register Va
the CsCAN Status Register. When the modem status value is 6,
communications can be established.
table. The same table can be used for
Page 12 of 62 ECN # 956