Horner APG XLt OCS HE-GSM04 - Manual (Page 49)

MAN4005-04-EN GPRS / GSM MODEM Configuration PAGE 49
8. AT+CSCA Service Center Address - Message Configuration Commands
AT+CSCA Service Center Address
Command Function Set command updates the SMSC address, through which mobile originated SMs
are transmitted.
Command Functional Group Short Message Services
Command Format Query
Response AT+CSCA=?
OK
Write Format
Response AT+CSCA=<”sca”>,<tosca>
+CSCA: <”sca”>,<tosca>
OK
Read Format
Response AT+CSCA?
+CSCA=”12063130004”, 145
OK
Execution Format
Response N/A
N/A
Parameter Values
<”sca”> SMSC Address
<tosca> SC address Type-of-Address
Notes The service center address must be present to complete delivery of SMS. Most
SIMs are delivered from the service provider with a service center already
programmed into the SIM. A “+” should be entered in front of the sms address,
but is not required by all operators.
9. AT+CSMP Set Text Mode Parameters
AT+CSMP Set Text Mode Parameters
Command Function Selects additional values needed when the SIM is sent to the network or placed
in storage.
Command Functional Group Short Message Services
Command Format Query
Response AT+CSMP=?
OK
Write Format
Response AT+CSMP=<fo>,<vp>,<pid>,<dcs>
OK
Read Format
Response AT+CSMP?
+CSMP: 17, 167, 0, 0
OK
Execution Format
Response N/A
N/A
Parameter Values
<fo> depending on the command or result code:
first octet of GSM 03.40 SMS- DELIVER, SMS-SUBMIT (default 17), or SMS-
COMMAND (de-fault 2) in integer format
<vp> depending on SMS-SUBMIT <fo> setting:
GSM 03.40 TP-Validity-Period either in integer format (default 167) ), in time-
string format (refer <dt>), or if is supported, in enhanced format (hexadecimal
coded string with quotes)
<pid> Protocol-Identifier in integer format (default 0), refer GSM 03.40
<dcs> SMS Data Coding Scheme (default 0), or Cell Broadcast Data Coding Scheme in
integer format depending on the command or result code: GSM 03.38
Page 49 of 62 ECN # 956