Horner APG XLt OCS HE-GSM04 - Manual (Page 33)

MAN4005-04-EN GPRS / GSM MODEM Configuration PAGE 33
New Contact Information
Group Name
Enter or select a Group Name.
1. It can contain characters A-Z, a-z, 0-9, and the _ underscore character.
2. The first character must be A-Z, a-z, or the _ underscore character.
3. Do not use spaces or special characters.
4. Do not use two consecutive underscore characters.
Note: In SMS configuration, max 32 Group names can be configured.
Phone Number
Enter a phone number or enter a register where the phone number is stored.
•
If you want to change the phone number at runtime, you should enter a register
address. The register address points to the location where you can dynamically
change the phone number without having to perform the SMS configuration
procedures again.
•
Phone numbers can not have characters other than Numbers 0 through 9 and
these special characters: , ( ) – +.
•
Phone numbers must not be more than 16 characters in length.
•
In SMS configuration user can configure max 32 numbers: 32 Tx messages and 32
Rx messages.
Phone Number Name
If you specify a register address in the Phone Number field, you can give the phone number
an I/O name.
Comments Add details for clarification.
• ttons as needed. Click Modify Contact and Delete Contact bu
• Click
OK to see the contacts on the directory.
The following screen shows examples of contacts added to the directory.
With the directory created, you may begin creating send and receive messages.
Page 33 of 62 ECN # 956