Horner APG XLt OCS HE-GSM04 - Manual (Page 30)

PAGE 30 GPRS / GSM MODEM Configuration MAN4005-04-EN
Additional SMS Settings
Be sure to click each button and perform the configuration procedures associated with each button.
Modem Initialization Settings
Configure this screen to select the type of Modem Initialization that is going to be used.
Configuration of Initialization Status Register Settings and User Specific Modem Initialization Script in the above screen is
required when User Initialization Script is selected.
Modem Initialization Settings
Modem Initialization
Type
The following options are available:
No Initialization (Modem Preconfigured): No initialization of GSM modem will be done. Select this
option if the attached GSM modem is pre-configured and does not require initialization.
Internal Modem Initialization: Select this option if you have an XLe/XLt/XL6 with internal modem.
Siemens TC Modem Initialization: In case of external GSM modem, select this option.
User Initialization Script: To use your own initialization script, select User Initialization Script. When
User Initialization Script is selected, the internal initialization of the device is not performed. It is
necessary to configure initialization status register and provide initialization script.
The type of Modem Initialization used affects various settings that are available on the COM Port
screen.
Address
Enter the starting register address location used to store the additional modem initialization script’s
latest command executed. This is a block of 10 registers that are consecutive in memory. For
example, if you are using R301 to R310, you need to enter the starting register address as %R301.
Name Enter (or select) the I/O Name.
User Specific Modem
Initialization Script
Enter your script in this box.
Page 30 of 62 ECN # 956