Horner APG XLt OCS HE-GSM04 - Manual (Page 54)

PAGE 54 GPRS / GSM MODEM Configuration MAN4005-04-EN
16. $UDPAPI Modem API Address - UDP API Commands
$UDPAPI Modem API Address
Command Function This command allows the user to query/set the API IP address and port number. Any
UDP packet received from a local host and addressed to the modem API IP and port
will be intercepted and processed as a modem API request. Any UDP packet
received from a remote server and addressed to the modem API port will be
intercepted and processed as a modem API request.
Command Functional Group Enfora Specific
Command Format Query
Response AT$UDPAPI=?
$UDPAPI: "(0-255).(0-255).(0-255).(0-
255)",(0-65535)
OK
Write Format
Response AT$UDPAPI=”<API IP>”,<API port>
OK
Read Format
Response AT$UDPAPI?
$UDPAPI: "<APIIP>", <API port>
Execution Format
Response N/A
N/A
Parameter Values
<API IP>
IP address for local API access
<API port > Udp port number for local and remote API access
17. PAD Commands
$PADDST PAD Destination IP/Port
Command Function This command allows the user to query/set the PAD destination IP and port address.
Command Functional
Group Enfora Specific
Command Format Query
Response AT$PADDST=?
$PADDST: "(0-255),(0-255),(0-255),(0-255)",(0-65535)
OK
Write Format
Response AT$PADDST =”<PAD destination
IP>”,<PAD destination port>
OK
Read Format
Response AT$PADDST?
$PADDST: =”<PAD destination
IP>”,<PAD destination port>
Execution Format
Response N/A
N/A
Parameter Values
<PAD destination IP > Destination IP for PAD data. PAD data is sent to and received from this IP. A
destination IP address of 0 will allow PAD access from any IP destination, and will
cause all locally generated PAD data to be sent to the IP address associated with
the last remotely received PAD data.
<PAD destination port > Destination port for PAD data. PAD data is sent to and received from this port. A
destination port of 0 will allow PAD access from any port, and will cause all locally
generated PAD data to be sent to the port associated with the last remotely received
PAD data.
Notes A value of 0 will allow any IP/port access to the TCP PAD. If populated and in
passive, server mode (AT$ACTIVE=0) the TCP PAD will limit access to the IP/port
defined.
Page 54 of 62 ECN # 956