Horner APG XLt OCS HE-GSM04 - Manual (Page 56)

PAGE 56 GPRS / GSM MODEM Configuration MAN4005-04-EN
20. $PADBLK PAD Block Size
$PADBLK PAD Block Size
Command Function This command allows the user to query/set the PAD block size.
Command Functional
Group Enfora Specific
Command Format Query
Response AT$PADBLK=?
PADBLK: (3-512)
OK
Write Format
Response AT$PADBLK =<block size >
OK
Read Format
Response AT$PADBLK?
$PADBLK: <block size>
Execution Format
Response N/A
N/A
Parameter Values
<block size >
PAD data will be created at the requested
PAD block size (number of bytes) unless an enabled forward character or PAD
timeout forces the data to be sent out at a smaller block size. Block size does
NOT include the IP or TCP/UDP header size.
21. $PADFWD PAD Forward Character
$PADFWD PAD Forward Character
Command Function This command allows the user to query/set the PAD forward character. If PAD
forward is enabled via AT$PADCMD, receipt of this character will immediately
forward all currently buffered PAD data.
Command Functional
Group Enfora Specific
Command Format Query
Response AT$PADFWD =?
$PADFWD: (0-ff)
OK
Write Format
Response
AT$PADFWD =<forward character>
OK
Read Format
Response AT$PADFWD?
$PADFWD: <forward character>
Execution Format
Response N/A
N/A
Parameter Values
<backspace character > Hex representation of user selected forward character. Default forward character
is 0D (Carriage return).
Page 56 of 62 ECN # 956