Horner APG XLt OCS HE-GSM04 - Manual (Page 16)

PAGE 16 GPRS / GSM MODEM Configuration MAN4005-04-EN
In the New Device – ID dialog, set the Device ID (IP address of the sim card used). The last digit of the Device ID is a modbus
slave ID, and it should match the settings from CSCAPE ( =2 as mentioned in the sample program).
Clicking Next> opens the New Device – TCP/IP dialog box.
•
Enter the correct port number (the same as in Cscape configurator), and TCP/IP protocol and continue with other
default settings.
Note: The port number should be configured as 10001 if Cscape connectivity is also required.
Page 16 of 62 ECN # 956