Sony DCR-TRV50 - Manual (Page 122)

122
Selecting the still image quality
You can select the image quality in still image recording. The default setting is SUPER
FINE.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only) or VCR.
Make sure that the LOCK switch is set to the left (unlock) position.
(2) Press MENU, then select STILL SET in with the SEL/PUSH EXEC dial
(p. 203).
(3) Turn the SEL/PUSH EXEC dial to select QUALITY , then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image quality , then press
the dial.
Using a “Memory Stick” – Introduction
1
3
4
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWER
LOCK
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
RETURN
SUPER FINE
FINE
STANDARD
[MENU] : END
REMAIN
12
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
RETURN
STANDARD
[MENU] : END
REMAIN
36
MENU