Sony DCR-TRV50 - Manual (Page 135)

135
“
Memory Stick
”
Operations
Your camcorder can read moving picture data recorded on a tape and record it as a still
image on a “Memory Stick.” Your camcorder can also capture moving picture data
through the input connector and record it as a still image on a “Memory Stick.”
Before operation
•Insert a recorded tape into your camcorder.
•Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. Moving pictures recorded on the tape are played back.
(3) Press PHOTO lightly until picture you want to capture from the tape freezes
and CAPTURE appears on the screen. Recording does not start yet.
To change from the image selected to another image, release PHOTO once and
press it lightly again.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
the “Memory Stick.” Recording is complete when the bar scroll indicator
disappears.
2
3 4
CAPTURE
FN INDEX PB FN INDEX PB
1 / 12 SFN
640
SFN
640
REW PLAY FF
PHOTO PHOTO
Recording images from a tape as still
images
[a]: Number of recorded images
[b]: Approximate number of images that can
be recorded on the “Memory Stick”
[a][b]