Sony DCR-TRV50 - Manual (Page 126)

126
You can record still images on “Memory Stick”s.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Make
sure that the LOCK switch is set to the left (unlock) position.
(2) Press PHOTO lightly. The green z mark stops flashing, then lights up. The
brightness of the image and focus are adjusted, being targeted for the middle
of the image and are fixed. Recording does not start yet.
(3) Press PHOTO deeper.
The still image will be displayed after the shutter sounds.
Recording is complete when the bar scroll indicator disappears.
The image when you pressed PHOTO deeper will be recorded on the
“Memory Stick.”
You can record still images on “Memory Stick”s in the tape
recording or tape recording standby
For the details, see page 47.
Recording still images on “Memory
Stick”s – Memory Photo recording
3
2
1 / 12 SFN
1360
SFN
1360
FN INDEX PLAY
FN INDEX PLAY
PHOTO
PHOTO
1
LOCK
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWER
[a][b]
[a]: Number of recorded images
[b]: Approximate number of images that can
be recorded on the “Memory Stick”