Sony DCR-TRV50 - Manual (Page 76)

76
During playback, you can process a scene using the following digital effect:
STILL, FLASH, LUMI. and TRAIL.
(1) In the playback or playback pause, press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a desired digital effect appears.
(3) Press a desired digital effect. In the STILL or LUMI., the picture where you
select the mode is stored in memory as a still image.
(4) Press –/+ to adjust the effect. Refer to page 62 for details.
(5) Press
OK to return to PAGE2.
To return to FN
Press EXIT.
To cancel the digital effect
Press OFF to return to PAGE2.
Notes
•You cannot process externally input scenes using digital effect.
•You cannot record images on a tape on your camcorder when you have processed the
image using digital effect. However, you can record images on a “Memory Stick”
(p. 135, 147), or on a VCR using your camcorder as a player.
Pictures processed by digital effect
Pictures processed by digital effect is not output through the DV IN/OUT jack.
When you set the POWER switch to OFF (CHG) or stop playing back
Digital effect is automatically canceled.
Playing back tapes with digital effect
1 2,3
FN
DIG
EFFT
OK OFF
STILL FLASH LUMI. TRAIL
DIG EFFT