Changing the default settings with the menu – Sony DCR-TRV50 User Manual
Page 208
208
Icon/item
OTHERS
DATA CODE*
1
AREA SET
DST SET*
2
BEEP
COMMANDER
Meaning
To display date, time and various settings
during playback when pressing DATA CODE
on the Remote Commander (p. 42)
To display date and time during playback when
pressing DATA CODE on the Remote
Commander
Temporarily change the area where you are
using your camcorder
Not during daylight saving time
During daylight saving time
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
To output the beep instead of the melody
To cancel all sound including shutter sound
To activate the Remote Commander supplied
with your camcorder
To deactivate the Remote Commander to avoid
erroneous remote control operation caused by
other VCR’s remote control
Changing the default settings with the menu
Mode
z
DATE/CAM
DATE
——
z
OFF
ON
z
MELODY
NORMAL
OFF
z
ON
OFF
*
1
When using the Remote Commander.
*
2
Instead of DST, SUMMERTIME is displayed on the screen for some models.
POWER
switch
VCR
MEMORY/
NETWORK
CAMERA
MEMORY/
NETWORK
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK