Sony DCR-TRV50 - Manual (Page 216)

216
Symptom Cause and/or Corrective Actions
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least one hour to acclimatize (p. 228).
• Some troubles have occurred in your camcorder.
c Remove the cassette and insert it again, then operate
your camcorder.
• The POWER switch is not set to OFF (CHG).
c Set it to OFF (CHG) (p. 16).
• The battery pack is not properly installed.
c Install it properly (p. 15).
• Something is wrong with the battery pack.
c Please contact your Sony dealer or local authorized Sony
service facility.
• Disconnect the power cord of the AC power adaptor or
remove the battery, then reconnect it in about one minute.
Turn the power on. If the functions still do not work, press
the RESET button using a sharp-pointed object (If you
press the RESET button, all the settings including the date
and time return to their defaults.) (p. 15, 19, 240).
• This is because some functions use a linear mechanism.
Your camcorder is not malfunctioning.
• The DISPLAY/TOUCH PANEL button is pressed.
c Press the LCD screen lightly.
c Press the DISPLAY/TOUCH PANEL button on your
camcorder or the DISPLAY button on the Remote
Commander (p. 42).
• Adjust the screen (CALIBRATION) (p. 230).
• The mirror mode is activated.
This is not a malfunction.
• The USB cable was connected before installation of the
USB driver was completed.
c Uninstall the incorrect USB driver and re-install the USB
driver (p. 179, 182).
• USBCONNECT is set to PTP in the menu settings when
the POWER switch is set to MEMORY/NETWORK (DCR-
TRV50 only).
c Set it to NORMAL (p. 207).
• Moisture has started to condense in your camcorder
(p. 228).
The melody or beep sounds for
five seconds.
You cannot charge the battery pack.
While charging the battery pack, no
indicator appears, the indicator
flashes in the display window.
No function works though the
power is on.
When you set the POWER switch to
VCR or OFF (CHG), if you move
your camcorder, you may hear a
clattering sound from inside your
camcorder.
The buttons do not appear on the
touch panel.
The buttons on the LCD screen do
not work.
The indicators appear mirror-
reversed in the viewfinder or on the
TV screen.
Image data cannot be transferred by
the USB connection.
The cassette cannot be removed
even if the cassette lid is open.
Types of trouble and how to correct trouble