Sony DCR-TRV50 - Manual (Page 203)

203
Customizing Your Camcorder
Changing the default settings with the menu
Icon/item
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
MOVIE SET
IMAGESIZE
REMAIN
(continued on the following page)
Mode
z OFF
NORMAL
HIGH SPEED
EXP BRKTG
MULTI SCRN
z SUPER FINE
FINE
STANDARD
z 1360
Ч
1020
640
Ч
480
z 320
Ч
240
160
Ч
112
z AUTO
ON
Meaning
To not record continuously.
To record from three to nine images
continuously (p. 128)
To record up to 16 images continuously fast
To record three images continuously with
different exposure
To record nine images continuously, display the
images on a single page divided into nine boxes
To record still images in the finest image quality
mode (p. 122)
To record still images in the fine image quality
mode
To record still images in the standard image
quality mode
To record still images at 1360
×
1020 size
(p. 124)
To record still images at 640
×
480 size
To record moving pictures at 320
×
240 size
(p. 124).
To record moving pictures at 160
×
112 size.
To display the remaining capacity of the
“Memory Stick” in the following cases:
• For five seconds after setting the POWER
switch to MEMORY/NETWORK (DCR-
TRV50 only) or VCR
• For five seconds after setting the POWER
switch to MEMORY/NETWORK (DCR-
TRV50 only) or VCR and inserting a “Memory
Stick”
• When the remaining capacity of the “Memory
Stick” is less than two minutes after setting the
POWER switch to MEMORY/NETWORK
(DCR-TRV50 only)
• For five seconds from the start of moving
picture recording
• For five seconds after completing a moving
picture recording
To always display the remaining capacity of the
“Memory Stick”
POWER
switch
MEMORY/
NETWORK
VCR
MEMORY/
NETWORK
MEMORY/
NETWORK
VCR
MEMORY/
NETWORK
VCR
MEMORY/
NETWORK