Others, Types of trouble and how to correct trouble – Sony DCR-TRV50 User Manual
Page 215
215
Troubleshooting
Others
Symptom
Cause and/or Corrective Actions
• The cassette has no cassette memory.
c
Use a cassette with cassette memory (p. 110).
• The cassette memory is full.
c
Erase unwanted titles (p. 112).
• The cassette is set to prevent accidental erasure.
c
Slide the write-protect tab so that red portion is not
visible (p. 23).
• The tape has a blank portion between recorded portions.
c
Superimpose the title to recorded positions (p. 110).
• The cassette has no cassette memory.
c
Use a cassette with cassette memory (p. 115).
• The cassette memory is full.
c
Erase unwanted data (p. 112).
• The cassette is set to prevent accidental erasure.
c
Slide the write-protect tab so that red mark is not visible
(p. 23).
• The input selector on the VCR is not set correctly.
c
Check the connection and set the input selector on the
VCR again (p. 89)
• The camcorder is connected to DV equipment of other
than Sony using the i.LINK cable (DV connecting cable).
c
Set it to IR (p. 94).
• You have attempted to set a program on a blank portion of
the tape.
c
Set the program again on a recorded portion (p. 97).
• The camcorder and the VCR are not synchronized.
c
Adjust the synchronization (p. 95).
• The IR SETUP code is incorrect.
c
Set the correct code (p. 91).
• Setting program on a blank portion of the tape is
attempted.
c
Set the program again on a recorded portion (p. 151).
• COMMANDER is set to OFF in the menu settings.
c
Set it to ON (p. 208).
• Something is blocking the infrared rays.
c
Remove the obstacle.
• The batteries are inserted with + and – incorrectly
matching + and – inside the battery compartment.
c
Insert the batteries correctly (p. 243).
• The batteries are dead.
c
Insert new ones (p. 243).
• DISPLAY is set to V-OUT/LCD in the menu settings.
c
Set it to LCD (p. 209).
(continued on the following page)
The title is not recorded.
The cassette label is not recorded.
Digital program editing to a tape
does not function.
Digital program editing to a
“Memory Stick” does not function.
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to output on
the TV or VCR.
Types of trouble and how to correct trouble