Sony DCR-TRV50 - Manual (Page 42)

42
To display the screen indicators – Display function
Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote
Commander supplied with your camcorder. The indicators disappear on the screen. To
make the indicators appear, press DISPLAY/TOUCH PANEL or DISPLAY again.
About date/time and various settings
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (data code).
Follow the steps below to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
1
Set the POWER switch to VCR, then play back a tape.
2 Press FN and select PAGE2.
3 Press DATA CODE.
4 Select CAM DATA or DATE DATA, then press OK.
5 Press EXIT.
Using the Remote Commander
Press DATA CODE on the Remote Commander in the playback.
The display changes as follows when you press the DATA CODE on the Remote
Commander:
date/time t various settings (SteadyShot, exposure, white balance, gain, shutter
speed, aperture value) t no indicator
Playing back a tape
DISPLAY/
TOUCH PANEL
DATA CODE
DISPLAY
DATACODE
CAM
DATA DATE
DATA
OFF OK