Avaya Media Gateway G250 - Manual (Page 108)

WAN Configuration
108 Avaya Integrated Management Release 4.0.1 Software Update Manager
3. Click Advanced. The Advanced tab of the Channel Group dialog box opens.
Figure 39: Channel Group Dialog Box - Advanced Tab
To configure the channels that comprise the Channel Group, check the checkboxes next to the
channels you want included in the Channel Group. Uncheck the checkboxes next to the
channels you want to remove from the Channel Group.
Note:
Note:
Channels that belong to other Channel Groups appear gray with the name of the
Channel Group to which they belong. These channels cannot be added to the
selected Channel Group.
To configure the speed factor of the Channel Group, select a Channel Group speed factor from
the Speed Factor pull-down listbox.
PPP
The PPP tab of the Channel Groups dialog box provides configuration information for the PPP
interface of the selected Channel Group.
To view the PPP tab of the Channel Group dialog box:
1. Click a Channel Group icon in the Chassis View. A list of Channel Groups on the port
appears.
2. Click the Channel Group you want to configure. The Channel Group dialog box opens with
the Channel Group tab.