Avaya Media Gateway G250 - Manual (Page 244)

IP Route
244 Avaya Integrated Management Release 4.0.1 Software Update Manager
The following parameters are displayed:
The parameters in the OSPF Link State Database window are read-only.
You can limit the table entries displayed. To start the display of entries from a specified interface
and IP address:
1. Click .
Or
Select Action > Start Point. The Start Point dialog box opens.
Figure 112: OSPF Link State Database Start Point Dialog Box
2. Select an LSA Type from the LSA Type listbox.
3. Click Start. The OSPF Link State Database displays entries starting with the specified LSA
Type.
Table 84: OSPF Link State Database Window
Field Description
LSA Type The type and format of the link state advertisement; for example,
Router links and Network links.
LSA ID Identifies the part of the routing domain that is described by the
advertisement. The LSA ID can be either a router ID or an IP address.
Router ID Identifies the originating router in the autonomous system.
Sequence No. The sequence number of the link state advertisement. Use this
parameter to detect old and duplicate link state advertisements. The
larger the sequence number, the more recent the advertisement. Note
that the sequence number is usually negative.
LSA Age The age of the link state advertisement (in seconds).
Checksum This parameter is a checksum of the complete contents of the
advertisement, not including the Age value.