Avaya Media Gateway G250 User Manual
Page 274
Policy Based Routing
274 Avaya Integrated Management Release 4.0.1 Software Update Manager
The following table provides a list of the fields in IP Simulate and their descriptions:
Table 99: IP Simulate Fields
Field
Description
Source IP
The IP address of the device from which the simulated packet
originated.
Destination IP
The IP address of the device to which the simulated packet is
addressed.
Source Application
The application from which the simulated packet was sent.
Select an application from the pull-down list or select custom and
define the Protocol and Port fields.
Destination
Application
The application to which the simulated packet is being sent.
Select an application from the pull-down list or select custom and
define the Protocol and Port fields.
Protocol
The number of the application protocol. The number can be in the
range of 0-255.
●
TCP - The protocol number is 6.
●
UDP - The protocol number is 17.
Src. Port
A specific application source.
When combined with the protocol number this identifies the
application from which the packet was sent.
Dst. Port
A specific application destination.
When combined with the protocol number, this identifies the
application to which the packet was sent.
TCP connection
established
The type of session to which the rule applies.
If checked, the simulated packet is from an established session. An
established session occurs when the packets entering the module
respond to a previously established communications session.
If unchecked, the simulated packet is from a not established session.
ICMP type/code
Type of ICMP packet to be used in this simulation. For possible
values, refer to Appendix C:
“ICMP Packet Types & Codes” on
.
IP Option
Enables setting of IP Fragmentation options.
IP fragments
Options for IP packet fragmentation. Possible values are:
●
Not fragmented
●
First packet fragmented
●
Packet fragmented non-l4
1 of 2