Avaya Media Gateway G250 - Manual (Page 112)

WAN Configuration
112 Avaya Integrated Management Release 4.0.1 Software Update Manager
The following table provides a list of the fields in the Frame Relay tab of the Channel Group
dialog box and their descriptions:
Table 41: Channel Group Dialog Box - Frame Relay Parameters
Field Description
LMI Type Local Management Interface Type. The Data Link Connection
Management scheme used by the frame relay interface. Possible
values are:
● ANSI
● q933a
● lmi-rev1
LMI Auto Sense Local Management Interface Auto-Sensing is a method for
automatically determining the LMI Type for the interface. Possible
values are:
● Enable
● Disable
Operational Status The operational status of the interface. Possible statuses include:
● Up - The interface is up and can transmit and receive
packets.
● Down - The interface is down due to some failure, and cannot
transmit or receive packets.
● Testing - The interface is in testing mode and cannot transmit
or receive regular data.
● Standby - The interface is a backup interface and cannot
transmit or receive packets unless the primary interface it
backs up fails.
● Disabled - The interface is disabled. It cannot transmit or
receive packets.
● Partially Down - The interface is up. However, some
interfaces (or PVCs) layered on top of this interface are
Down. Some packets can be transmitted and received.
MTU (octets) The size (in octets) of the largest datagram that can be sent via the
interface.
1 of 2