Avaya Media Gateway G250 - Manual (Page 243)

OSPF
Issue 5 October 2007 243
The following parameters are displayed:
You can modify OSPF Area parameters.
Viewing the OSPF Link State Database
To display the OSPF Link State Database:
Select IP Route > OSPF > OSPF Link State Database. The OSPF Link State Database
window opens.
Figure 111: OSPF Link State Database Window
Table 83: OSPF Area Parameters
Field Description
Area ID A unique number identifying the OSPF area to which this router belongs.
Area ID 0.0.0.0 is used for the OSPF backbone.
Stub Area If checked, external link-state advertisements are not imported into the area.
Area Border
Routers Count The number of routers designated as OSPF Area Border Routers for the
area chosen.
AS Border Routers
Count
The number of routers designated as OSPF Autonomous System Border
Routers for the area chosen.
Area LSAs Count The number of Link-State Advertisements for the area chosen.
Area LS Checksum
Summary Summary of Link-State Checksums for the area chosen.