Avaya Media Gateway G250 - Manual (Page 45)

Viewing Module Configuration
Issue 5 October 2007 45
Viewing Module Configuration
The Module Configuration dialog box provides you with information specific to a selected
module.
● Module Configuration - General Tab - Provides detailed information about the module,
such as the module’s position in the device, the module’s type, description, number of
ports, mode of operation, and any faults occurring on the module.
● Module Configuration - Power Tab - Provides information about the module’s Power over
Ethernet (PoE) configuration. For more information, refer to
“Power over Ethernet” on
page 67 .
Note:
Note:
The information fields in the Module Configuration dialog box vary according to
the type of module selected.
Num of Supplicants
per Port Number of supplicants per port allowed in
MAC-Based-Authentication. This parameter is not relevant in
port-based-authentication mode.
Possible values are 1-8. The default value is 2.
802.1x LLDP
Transmitted
VLAN-IDs When enabled, allows transmission of port LLDP information (PVID,
Port Vlan) in the LLDP packet sent to the Avaya IP phone connected
to the port.
Max Number of
Supplicants The device/system maximum number of supplicants.
Current Number of
Supplicants The current number of supplicants connected to the device/system.
Authenticated
Supplicants The number of authenticated supplicants connected to the device/
system.
Authenticating
Supplicants Number of supplicants connected to the device/system being
authenticated (not authenticated yet).
Table 11: Device Configuration Fields - 802.1x Tab (continued)
Field Description
2 of 2