Avaya Media Gateway G250 - Manual (Page 139)

USP Configuration
Issue 5 October 2007 139
DLCIs
The DLCIs tab of the USP dialog box provides information about the DLCIs in the USP.
To view the DLCIs tab of the USP dialog box:
1. Click a USP symbol in the Chassis View or Tree View. The USP dialog box opens with the
Serial Port tab.
2. Click DLCIs. The DLCIs tab of the USP dialog box opens.
Operational Status The operational status of the Sub-Frame-Relay interface.
● Up - The interface is up and can transmit and receive packets.
● Down - The interface is down due to some failure, and cannot
transmit or receive packets.
● Testing - The interface is in testing mode and cannot transmit
or receive regular data.
● Standby - The interface is a backup interface and cannot
transmit or receive packets unless the primary interface it
backs up fails.
● Disabled - The interface is disabled. It cannot transmit or
receive packets.
● Partially Down - The interface is up. However, some
interfaces (or PVCs) layered on top of this interface are Down.
Some packets can be transmitted and received.
DLCIs A list of all DLCIs associated with the Sub-Frame-Relay interface.
Backup Interface The interface configured to back up this interface.
Table 49: USP Dialog Box - Sub-Interfaces Parameters (continued)
Field Description
2 of 2