Avaya Media Gateway G250 - Manual (Page 161)

Configuring the Converged Network Analyzer Application
Issue 5 October 2007 161
The following table provides a list of the fields in the TFTP Server Configuration dialog box and
their descriptions:
For more information on the user interface, refer to “Using Dialog Boxes and Tables” on page 32 .
Configuring the Converged Network Analyzer Application
Converged Network Analyzer (CNA) is a distributed system for real-time monitoring of IP
networks, using active measurements. CNA can run connectivity tests with pings, topology tests
with traceroute, and QoS tests with synthetic RTP streams. Test plugs are entities within the
CNA system that receive instructions from a Scheduler for running tests, perform the tests, and
send back the results.
The following options are available for configuring Converged Network Analyzer on the Avaya
G250/G350/G450 Device:
● Configuring an External Test Plug - Configuration information for an external test plug.
● Configuring Schedulers - Scheduling information for the test plugs.
To access and configure the Converged Network Analyzer application:
Select Configure > CNA. The CNA Configuration dialog box opens.
Table 59: TFTP Server Configuration Fields
Field Description
Mode Administrative status of the TFTP service. Possible values are:
● Enable
● Disable
NVRAM Total Bytes
Used Total bytes used for scripts in NVRAM.
NVRAM Total Bytes
Capacity Total byte capacity for scripts in NVRAM.
RAM Total Bytes
Used Total bytes used for scripts and images in RAM.
RAM Total Bytes
Capacity Total byte capacity for scrips and images in RAM.