Avaya Media Gateway G250 User Manual
Page 221
Configuring IP Interfaces
Issue 5 October 2007
221
You can create, modify, and delete IP interfaces. For more information on editing tables, refer to
Note:
Note:
IP Address, IP NetMask, Layer 2 Interface Name, and Status must be defined
before creating an IP interface.
Proxy ARP
When enabled, the router responds to ARP requests received on a
Layer 2 interface for a device reachable on a different Layer 2
interface. The response is the MAC address of the router interface.
Note:
Note:
This field is only available when additional parameters
are selected. To select additional parameters,
click
on the Routing Manager Application Toolbar.
Netbios
Rebroadcast
The status of Netbios rebroadcast service on the interface. Possible
values are:
●
Both - Netbios messages are rebroadcasted both to and from
this interface.
●
Disable - Netbios messages are rebroadcasted neither to nor
from this interface.
Note:
Note:
This field is only available when additional parameters
are selected. To select additional parameters,
click
on the Routing Manager Application Toolbar.
ICMP Redirect
Status
The status of ICMP Redirect service on the interface. Possible values
are:
●
Enable - Redirect messages are sent if the router is forced to
resend a packet through the same interface from which it was
received.
●
Disable - Redirect messages are not sent.
Note:
Note:
This field is only available when additional parameters
are selected. To select additional parameters,
click
on the Routing Manager Application Toolbar.
Broadcast Address
Define the broadcast address value. Possible values are:
●
Zero Fill - defines the broadcast address as zero. For example,
192.92.0.0.
●
One Fill - defines the broadcast address as one. For example,
192.92.255.255.
Table 70: IP Interface Table Parameters (continued)
Field Description
3 of 3