Avaya Media Gateway G250 User Manual
Page 99
Ethernet WAN Port Configuration
Issue 5 October 2007
99
Note:
Note:
If the Encapsulation field of the Ethernet WAN Port Configuration - General Tab
is set to ARPA, the PPPoE client is not supported and returns a result of N/A in
all fields of the Ethernet WAN Port Configuration - PPPoE Client Tab.
Note:
Note:
All fields in the Ethernet WAN Port Configuration - PPPoE Client tab are
read-only except for Negotiated IP and Request DNS Servers.
Status
The operational status of the PPPoE connection. Possible values are:
●
Up - The interface is up and can transmit and receive packets.
●
Down - The interface is down due to a fault and cannot transmit or
receive packets.
●
Testing - The interface is in testing mode and cannot transmit or
receive regular data.
●
Partially Down - The interface is up. However, some interfaces
layered on top of this interface are Down. Some packets can be
transmitted and received.
●
Admin Down - The interface has been shut down in the device
configuration and cannot transmit or receive packets.
●
Dormant Down - The interface is down due to no packets being sent
or received for a long period of time. For more information, refer to the
Administration for the Avaya G250 and Avaya G350 Media Gateways.
●
KeepAlive Down - The interface is down due to not having received a
KeepAlive packet in the configured interval. For more information,
refer to Administration for the Avaya G250, Avaya G350, and Avaya
G450 Media Gateways.
●
N/A
Negotiated IP
Enable/Disable PPP-IPCP IP address negotiation. When enabled, the WAN
fast Ethernet interface receives an IP address from the remote peer.
IP Address
The IP address received from the remote peer during the IP negotiation
phase.
Request DNS
Servers
Whether to request DNS server information from the remote peer. Possible
values are:
●
Enable - Request DNS server information from the remote peer.
●
Disable - Do not request DNS server information from the remote
peer.
Table 36: Ethernet WAN Port Configuration - PPPoE Client Tab (continued)
Field Description
2 of 2