Avaya Media Gateway G250 - Manual (Page 262)

Policy Based Routing
262 Avaya Integrated Management Release 4.0.1 Software Update Manager
Dst Wildcard Destination Address Wildcard. A wildcard that can modify the definition of
the destination addresses to which this rule applies.
You can change the Destination Address Wildcard using the pull-down
list or enter a user defined wildcard. Possible DestAddrWild values
include:
● Host
● Any
● User Defined
For more information about using wildcards, refer to “Using Address
Wildcards” on page 272 .
Fragment When enabled, the IP rule applies only to packets that are non-initial
fragments, and does not apply to initial fragments or non-fragments.
When enabled, the Src Application and Dst Application fields return a
value of N/A.
Not Logical not. This enables all protocols except for the protocol listed in the
following Protocol field.
Protocol Protocol. The protocol of the packets to which this rule applies. Possible
values include:
● AH
● ESP
● GRE
● ICMP
● IGMP
● IPComp
● IP-in-IP
● OSPF
● PIM
● RSVP
● SpectraLink
● TCP
● UDP
● VRRP
● IP
Not Logical not. This enables all traffic except for the traffic affected by the
following DSCP filter to flow normally.
DSCP Filter DSCP Filter. The DSCP filter applied to the traffic to which this rule
applies.
Not Logical not. This enables all applications except for the application listed
in the following Src Application field.
Table 94: Policy Based Routing Rules List Fields (continued)
Field Description
2 of 3