Agilent Technologies VXI E1439 - Manual (Page 178)

168
Agilent E1439 Programmer's Reference
Functions listed alphabetically
age1439_reset_hard
Resets the module to the power-up state.
VXIplug&play Syntax
#include "age1439".h
ViStatus age1439_reset_hard(ViSession id);
Description
age1439_reset_hard resets the module’s firmware and hardware including the processor.
Parameters
id is the VXI instrument session pointer returned by the age1439_init function.
Comments
The reset values are listed in “Default values” on page 201 . In addition, the hardware registers,
including the save register, are reset to the power-up state.
This command takes about 15 seconds to complete.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
“age1439_error_message” on
page 102 .
See Also
“Commands which halt active measurements” on page 198 , “age1439_init” on page 132 ,
“age1439_reset” on page 167