Age1439_revision_query – Agilent Technologies VXI E1439 User Manual
Page 179
169
Agilent E1439 Programmer's Reference
Functions listed alphabetically
age1439_revision_query
Returns strings that identify the date of the firmware revision.
VXIplug&play Syntax
#include "age1439".h
ViStatus age1439_revision_query(ViSession id, ViChar driverRev[], ViChar instrRev[]);
Parameters
id
is the VXI instrument session pointer returned by the age1439_init function.
driverRev
returns the date and time of the module's driver revision in the form:
a.dd.dd OPERS Ddd Mmm Date hh:mm:ss YYYY where Ddd is the
abbreviated day of the week and Date is an integer from 1 to 31
instrRev
returns the date, time, and board number of the module's firmware revision in the form:
mm-dd-yyyy hh:mm 01Bd: xxxx; 02Bd:xxxx where xxxx is a
manufacturer’s date code used for service purposes.
Note
For this parameter you must allocate a character array of at least 256 characters
, including the null byte, prior to calling this function in any programming language.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
.
See Also