Agilent Technologies VXI E1439 - Manual (Page 44)

34
Using the Agilent E1439
Managing multiple modules
Managing multi-module systems
Note
The symbol indicates a 50 ohm terminator, which is required on unused SMB connectors in
systems using front panel distribution
Module #1 - “Rear master,
internal reference” on page
82
Module #2 - “Front slave,
phase locked to master” on
page 81
Module #1 - “Front master,
phase locked to external
reference” on page 81
Module #2 - “Front slave,
phase locked to master” on
page 81
Module #1 - “Front master,
internal reference” on page
80
Module #2 - “Front slave,
phase locked to master” on
page 81
Module #1 - “Front master,
phase locked to external
reference” on page 81
Module #2 - “Front slave,
phase locked to master” on
page 81
Internal clock and SYNC distribution
using VXI backplane ECL trigger lines.
External reference and SYNC distribution
using VXI backplane ECL trigger lines.
Slot
0
Contr
oller
Slot
0
Contr
oller
Backplane
Backplane
10 MHz
frequency
reference
1 2 1 2
Internal clock and SYNC distribution using
front panel SMB clock and SYNC
extender connections.
External reference and SYNC distribution using
front panel SMB clock and SYNC
extender connections.
Slot
0
Contr
oller
Slot
0
Contr
oller
10 MHz
frequency
reference
1 2 1 2