Merrychef eikon e6 - Manual (Page 25)

E6 SERVICE MANUAL REV C 06/12
25
ERROR & DIAGNOSTICS
ERROR MESSAGES
1. A description of the type of error is shown.
Check for a number following ‘Error:’ (A) and
refer to the Error Codes (Fault Finding
Section) for more details. The Oven Serial
Number, Model, UI (QTS) version and SRB
version information is also displayed below.
2. Clear the Error message by power cycling the
mains power supply to the oven (not the oven
ON/OFF switch)
COPYING ERROR MESSAGES:
1. Enter oven settings menu (B) and select the
USB symbol.
2. Slide up the USB cover and insert the USB
memory stick.
3. Select Upload Files.
4. Select Error Log.
5. Select OK to copy the Error Log to the USB
memory stick. The upload progress is shown
followed by the upload status.
6. Select backspace 3 times to return to the main
menu.
7. Remove the USB memory stick and replace
the USB cover.
ERROR LOG
Enter Service Mode and select ‘ERROR LOG’
(C) to display a listing of oven component
errors. Error details include; component,
description, error caused, Date & Time of the
Error with details of Failure and Range.
Scroll down the list (if necessary) and select an
error from the list to display individual records.
Select backspace to return to the list, again to
return to the Service menu.
OVEN COUNTERS
1. Select ‘OVEN COUNTERS’ (D) to display the
oven component usage and ambient Controls
area temperature. Details include the number
of screen touches, filter cycles, door cycles,
total Oven, Magnetron and Heater element
power on time and the ambient controls area
temperature in the cabinet.
2. Select backspace to return to the Service
menu.
B
A
C
D