Merrychef eikon e6 - Manual (Page 33)

E6 SERVICE MANUAL REV C 06/12
33
Recommission Test
The Recommission tests are performed following
the completion of a service or repair to ensure
the oven is operational before handing back to
the customer.
Some of the tests have a countdown timer where
failing to carry out a test within the time limit will
cause a test failure and the Recommission test will
have to be restarted.
Procedure:
1 Select ‘Recommission Test’ (A) from the service
mode oven tests and follow the on screen
instructions to perform the tests. Do not select
the red ‘X unless you want to stop the test.
2 After a test has successfully passed, select OK
to continue.
3 When all the tests have been successfully
performed the display shows the Recommission
test has passed, select OK to confirm.
4 In the event of a Recommission test failure, the
detail will be recorded in the Error log. Any error
should be rectified and the Recommission test
run again.
A
RECOMMISSION TEST