Beijer Electronics SCOM RBC EN - Manual (Page 47)

Command Reference
Beijer Electronics, MAEN993 47
Response Message (Negative Acknowledge)
Under normal operation conditions, a device never sends a negative acknowledge in
response to this command.
Maximum Lr for this Command
9
Example
The device at address 0.7 (group 0, address 7) should start with default brightness:
According to the data returned by the device at address 0.7 (group 0, address 7), the
device starts with default brightness:
0 1 2 3 4 5 6 7...9 10
0x07 0x07 0x4C 0x41 0x55 0x03 0x0C 0x01 0xA4 0x03 0x57
0 1 2 3 4 5 6 7 8
0x06 0x07 0x4C 0x41 0x55 0x01 0x0F 0x03 0xFC