BrandTech Scientific Transferpette electronic - Manual (Page 38)

Please read the following carefully!
This instrument may sometimes be used with hazardous materials, operations, and equipment. It is be-
yond the scope of this manual to address all of the potential safety problems associated with its use in
such applications. It is the responsibility of the user of this pipette to consult and establish appropriate
safety and health practices and determine the applicability of regulatory limitations prior to use.
Safety Instructions
Improper use of the instrument or the batteries (short circuit, mechanical damage,
overheating, incorrect AC adapter, etc.) can lead to battery explosion.
!
Warning!
38
1. Every user must read and understand this
operating manual prior to using the instrument
and observe these instructions during use.
2. Follow general instructions for hazard preven-
tion and safety instructions; e.g., wear protec-
tive clothing, eye protection and gloves.
When working with infectious or other hazard-
ous samples, all appropriate regulations and
precautions must be followed.
3. Observe all specifications provided by reagent
manufacturers.
4. Never use the instrument in an atmosphere
with a danger of explosion. Highly flammable
liquids must not be pipetted.
5. Only use the instrument for pipetting liquids
that conform to the specifications defined in
the operating exclusions and limitations (see
page 39). If in doubt, contact the manufacturer
or supplier.
6. Always use the instrument in such a way that
neither the user nor any other person is
endangered. Avoid splashes. Only use suitable
vessels.
7. Avoid touching the tip orifices when working
with hazardous samples.
8. Never use force on the instrument!
9. Use only original spare parts. Do not attempt
to make any technical alterations. Do not
dismantle the instrument any further than is
described in the operating manual!
10. Before use check the instrument for vis-
ible damages. If there is a sign of a potential
malfunction (e.g., piston difficult to move,
mechanically damaged connections), immedi-
ately stop titrating. Consult the 'Troubleshoot-
ing' section of this manual (see page 65), and
contact the manufacturer if needed.
11. The original battery must not be replaced with
non rechargeable batteries or rechargeable
batteries of other manufacturers.
12. To charge the NiMH battery pack, use only the
original AC adapter.
13. The AC adapter has to be protected against
moisture and must be used only for this instru-
ment.
14. Dispose of batteries only when discharged and
according to applicable regulations.