BrandTech Scientific Transferpette electronic - Manual (Page 58)

1x
1x
1x
>3s
Press and hold the MENU
key (> 3 sec) until CAL
appears. The display reads
‚off‘. ‚CAL‘ blinks.
Press one of the arrow
buttons to activate the CAL
mode. The display changes
from ‚off‘ to ‚on‘. ‚CAL‘ con-
tinues to blink.
Press the ENTER key. The
display now shows the set
pipetting volume.
‚CAL‘ blinks.
Press the ENTER key.
The display shows the tested
and corrected volume. The
CAL symbol is continously
displayed to confirm that an
adjustment has been made.
Use the arrow keys (+/-) to
set the volume, which was
previously determined and
tested. ‚CAL‘ blinks.
The instrument should be set to either the nominal volume (for example
200 µl for a 200 µl pipette) or a specific test volume, in the standard
pipetting mode (PIP). See page 42 and 46 for procedures.
E.g., volume according to testing of volume 201.3 µl.
Easy Calibration Adjustment of the Transferpette ® electronic
1.
Bring up the CAL
mode
2.
Activate the CAL
mode
3.
Confirm CAL mode
4.
Set the volume
5.
Confirm volume
The calibration mode ‚CAL‘
Adjustment
What to do How to do it Keys to press Display readout
58