BrandTech Scientific Transferpette electronic - Manual (Page 51)

➞
1x
1x
1x
English
Press the pipetting key
again and the set volume is
aspirated into the tip. Press
the pipetting key again and
the volume is discharged
again, and so on...
7.
Repeat aspiration
of liquid in revPIP
mode
Press the ENTER key after
the last pipetting operation.
The display shows ‚blo‘ for
blow-out.
8.
Initiate blow-out
Press the pipetting key
once to initiate the blow-out
process. The residual liquid
is discharged.
After the residual liquid is
discharged (blow-out), the
display moves back to the
start position.
9.
End pipetting
revPIP Mode
What to do How to do it Keys to press Display readout
51