Pip mode – BrandTech Scientific Transferpette electronic User Manual
Page 46
3x
1x
1x
1x
➞
Press the MENU key three
times to bring up the mode
selection menu. ‚Mode‘
blinks.
Use one of the arrow keys
to scroll through the modes
until ‚PIP‘ appears.
‚Mode‘ continues to blink.
Press the ENTER key.
The display now shows ‚blo‘
for blow-out.
Press the pipetting key once
to aspirate the liquid.
Press the pipetting key once
to move the piston into the
start position.
The arrow in the display
points upwards (aspiration).
PIP Mode
The Programs · Settings and Use
The standard program – a previously set volume is aspirated and then discharged.
Volume and speed adjustments are described on pages 42 and 43.
1.
Bring up the menu
2.
Select PIP mode
3.
Confirm PIP mode
4.
Prepare for
pipetting
5.
Aspirate liquid
What to do
How to do it
Keys to press
Display readout
46