Table 8, Configure ies or vprn vrrp owner parameters – Alcatel-Lucent 7750 SR OS User Manual

Page 201

Advertising
background image

VRRP

7750 SR OS Router Configuration Guide

Page 201

Table 8: CLI Commands to Configure IES or VPRN Service VRRP Parameters

Command

Description Page

VRRP IES service and network interface parameters are configured in the following contexts:

config>service>ies>interface>vrrp

211

config>service>vprn>interface>vrrp

211

config>router>interface>vrrp

215

Configure IES or VPRN VRRP owner parameters

config>service>ies>interface>vrrp virtual-router-id owner

config>service>vprn>interface>vrrp virtual-router-id owner

interface

Creates a logical IP routing interface for IES services. Once created,
attributes like an IP address and service access point (SAP) can be
associated with the IP interface.

address

Assigns the primary IP address, IP subnet, and broadcast address
format to an IES IP router interface.

secondary

Assigns a secondary IP address, IP subnet/broadcast address format
to the interface.

no shutdown

Enables the interface and address instance.

vrrp virtual-router-id

owner

Creates context for configuring VRRP virtual router instance and can
specify which virtual router instance owns the backed up IP
addresses. A virtual router is defined by its virtual router identifier
(VRID) and a set of IP addresses.
When the optional

owner

keyword is used the virtual router instance

owns the backed up IP addresses. All other virtual router instances
participating in this message domain must have the same vrid
configured and cannot be configured as

owner

. Once created, the

owner

keyword is optional when entering the vrid for configuration

purposes.

240

authentication-type

Configures the VRRP authentication:
• VRRP Type 0 authentication provides no authentication. All

compliant VRRP advertisement messages are accepted.

• VRRP Type 1 authentication provides a simple password check on

incoming VRRP advertisement messages.

• VRRP Type 2 authentication provides an MD5 IP header

authentication check on incoming VRRP advertisement messages.

228

authentication-key

Sets/clears the simple text authentication key used for generating
master VRRP advertisement messages and validating received VRRP
advertisements.

227

Advertising