Alcatel-Lucent 7750 SR OS - Manual (Page 218)

Configuring VRRP Policy Components
Page 218 7750 SR OS Router Configuration Guide
Router Interface VRRP Owner
Use the CLI syntax displayed below to configure owner router interface VRRP parameters:
CLI Syntax: config>router
interface ip-int-name
address ip-addr/mask-length
no shutdown
vrrp vrid owner
authentication-type {password}
authentication-key [authentication-key | hash-key]
[hash | hash2]
backup ip-addr
init-delay seconds
mac ieee-mac-address
message-interval seconds
The following example displays router interface owner VRRP configuration command usage:
Example: config>router# interface "vrrpowner"
config>router>if# address 10.10.10.23/24
config>router>if# vrrp 1 owner
config>router>if>vrrp# backup 10.10.10.23
config>router>if>vrrp# authentication-type password
config>router>if>vrrp# authentication-key "testabc"
config>router>if>vrrp# exit
The following example displays the router interface owner VRRP configuration:
A:SR2>config>router# info
#------------------------------------------
interface "vrrpowner"
address 10.10.10.23/24
vrrp 1 owner
backup 10.10.10.23
authentication-type password
authentication-key "testabc"
exit
exit
#------------------------------------------
A:SR2>config>router#