Alcatel-Lucent 7750 SR OS - Manual (Page 207)

VRRP
7750 SR OS Router Configuration Guide Page 207
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure VRRP
and provides the CLI commands.
VRRP parameters are defined under a service interface or a router interface context. An IP
address must be assigned to each IP interface. Only one IP address can be associated with an
IP interface but several secondary IP addresses also be associated.
Owner and non-owner configurations must include the following parameters:
• All participating routers in a VRRP instance must be configured with the same vrid.
• All participating non-owner routers can specify up to 16 backup IP addresses (IP
addresses the master is representing). The
owner configuration must include one back
IP address.
Other owner and non-owner configurations include the following optional commands:
• authentication-type
• authentication-key
• mac
• message-interval
In addition to the common parameters, the following non-owner commands can be configured:
• master-int-inherit
• priority
• policy
• ping-reply
• preempt
• telnet-reply
• ssh-reply
• [no] shutdown