Alcatel-Lucent 7750 SR OS - Manual (Page 403)

Filter Policies
7750 SR OS Router Configuration Guide Page 403
Applied No — The filter policy ID has not been applied.
Yes — The filter policy ID is applied.
Def. Action Forward — The default action for the filter ID for packets that do not
match the filter entries is to forward.
Drop — The default action for the filter ID for packets that do not
match the filter entries is to drop.
Service Id The service ID on which the filter policy ID is applied.
SAP The Service Access Point on which the filter policy ID is applied.
(Ingress) The filter policy ID is applied as an ingress filter policy on the inter-
face.
(Egress) The filter policy ID is applied as an egress filter policy on the interface.
Type The type of service of the Service ID.
Entry The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive) , then the filter entry is incomplete as no action has been
specified.
Log Id The filter log ID.
Src. IP The source IP address and mask match criterion. 0.0.0.0/0 indicates
no criterion specified for the filter entry.
Dest. IP The destination IP address and mask match criterion. 0.0.0.0/0 indi-
cates no criterion specified for the filter entry.
Protocol The protocol ID for the match criteria. Undefined indicates no proto-
col specified.
ICMP Type The ICMP type match criterion. Undefined indicates no ICMP type
specified.
Fragment Off — Configures a match on all non-fragmented IP packets.
On — Configures a match on all fragmented IP packets.
Sampling Off — Specifies that traffic sampling is disabled.
On — Specifies that traffic matching the associated IP filter entry is
sampled.
IP-Option Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
TCP-syn Off — Specifies that the SYN bit is disabled.
On — Specifies that the SYN bit is set.
Label Description (Continued)