Alcatel-Lucent 7750 SR OS - Manual (Page 451)

Cflowd
7750 SR OS Router Configuration Guide Page 451
Configuring Cflowd Collectors
To configure cflowd collector parameters, enter the following commands:
CLI Syntax: config>cflowd#
collector ip-address[:port]
aggregation
as-matrix
destination-prefix
protocol-port
raw
source-destination-prefix
source-prefix
autonomous-system-type [origin | peer]
description description-string
no shutdown
The following example displays collector and aggregation configuration command usage:
Example: config>cflowd# collector 10.10.10.1:2000
config>cflowd>collector$ autonomous-system-type peer
config>cflowd>collector# aggregation
config>cflowd>coll>agg# as-matrix
config>cflowd>coll>agg# raw
config>cflowd>coll>agg# description “AS info collector”
config>cflowd>coll>agg# exit
config>cflowd# collector 10.10.10.1:2000
config>cflowd>collector$ no shutdown
config>cflowd>collector# description "Neighbor collector"
config>cflowd>collector# aggregation
config>cflowd>coll>agg# protocol-port
config>cflowd>coll>agg# source-destination-prefix
config>cflowd>collector# no shutdown
config>cflowd>coll>agg# exit