Src-ip, Src-port – Alcatel-Lucent 7750 SR OS User Manual

Page 380

Advertising
background image

Page 380

7750 SR OS Router Configuration Guide

Default

no src-ip — no source IP match criterion

Parameters

ip-address — The IP prefix for the IP match criterion in dotted decimal notation.

Values

0.0.0.0 — 255.255.255.255

mask — The subnet mask length expressed as a decimal integer.

Values

0 — 32

netmask — Any mask epressed in dotted quad notation.

Values

0.0.0.0 — 255.255.255.255

src-ip

Syntax

src-ip [ipv6-address/prefix-length]
no src-ip

Context

config>filter>ipv6-filter>entry>match

Description

This command configures a source IPv6 address range to be used as an IP filter match criterion.

The no form of the command removes the source IPv6 address match criterion.

Default

no src-ip - no source IP match criterion

Parameters

ipv6-address — The IP prefix for the IP match criterion in dotted decimal notation.

Values

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x [0..FFFF]H
d [0 — 255]D

prefix-length — The IPv6 mask value for the IPv6 filter entry.

Values

1 — 28

src-port

Syntax

src-port {lt | gt | eq} src-port-number
src-port range
start end
no src-port

Context

config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match

Description

This command configures a source TCP or UDP port number or port range for an IP filter match
criterion.

The no form of the command removes the source port match criterion.

Default

No src-port match criterion

Advertising