Alcatel-Lucent 7750 SR OS - Manual (Page 56)

Common Configuration Tasks
Page 56 7750 SR OS Router Configuration Guide
Both the IPv4 and IPv6 system addresses must to configured
CLI Syntax: config>router
interface ip-int-name
address {ip-address/mask>|ip-address netmask} [broad-
cast all-ones|host-ones]
ipv6
address ipv6-address/prefix-length [eui-64]
Example : config>router# interface system
config>router>if# address 200.200.200.1/32
config>router>if# ipv6
config>router>if>ipv6# interface “ip-1.1.1.1”
config>router>if>ipv6# exit
The following displays the configuration output showing the interface information.
A:ALA-49>configure>router# info
----------------------------------------------
...
interface "system"
address 200.200.200.1/32
ipv6
address 3FFE::C8C8:C801/128
exit
exit
...
----------------------------------------------
A:ALA-49>configure>router#