Ssh-reply – Alcatel-Lucent 7750 SR OS User Manual

Page 238

Advertising
background image

Configuration Commands

Page 238

7750 SR OS Router Configuration Guide

If the shutdown command is executed, no VRRP advertisement messages are generated and all
received VRRP advertisement messages are silently discarded with no processing.

By default, virtual router instances are created in the no shutdown state.

Whenever the administrative state of a virtual router instance transitions, a log message is generated.

Whenever the operational state of a virtual router instance transitions, a log message is generated.

Owner Virtual Router — An owner virtual router context does not have a shutdown command.
To administratively disable an owner virtual router instance, use the shutdown command within the
parent IP interface node which administratively downs the IP interface.

ssh-reply

Syntax

[no] ssh-reply

Context

config>router>if>vrrp

Description

This command enables the non-owner master to reply to SSH requests directed at the virtual router
instance IP addresses.

Non-owner virtual router instances are limited by the VRRP specifications to responding to ARP
requests destined to the virtual router IP addresses and routing IP packets not addressed to the virtual
router IP addresses.

This limitation can be disregarded for certain applications. Ping, Telnet and SSH can be individually
enabled or disabled on a per-virtual-router-instance basis.

The ssh-reply command enables the non-owner master to reply to SSH requests directed at the
virtual router instances IP addresses. The SSH request can be received on any routed interface. SSH
must not have been disabled at the management security level (either on the parental IP interface or
based on the SSH source host address). Proper login and CLI command authentication is still
enforced.

When ssh-reply is not enabled, SSH requests to non-owner master virtual IP addresses are silently
discarded.

Non-owner backup virtual routers never respond to SSH requests regardless of the ssh-reply setting.

The ssh-reply command is only available in non-owner vrrp nodal context.

By default, SSH requests to the virtual router instance IP addresses are silently discarded.

The no form of the command discards all SSH request messages destined to the non-owner virtual
router instance IP addresses.

Default

no ssh-reply - SSH requests to the virtual router instance IP addresses are discarded.

Advertising