Alcatel-Lucent 7750 SR OS - Manual (Page 66)

Common Configuration Tasks
Page 66 7750 SR OS Router Configuration Guide
Router Advertisement
To configure the router to originate router advertisement messages, the router-advertisement
command must be enabled. All other router advertisement configuration parameters are optional.
Router advertisement on all IPv6-enabled interfaces will be enabled.
Use the following CLI syntax to enable router advertisement and configure router advertisement
parameters:
CLI Syntax: config>router# router-advertisement
interface ip-int-name
current-hop-limit number
managed-configuration
max-advertisement-interval seconds
min-advertisement-interval seconds
mtu mtu-bytes
other-stateful-configuration
prefix ipv6-prefix/prefix-length
autonomous
on-link
preferred-lifetime {seconds | infinite}
valid-lifetime {seconds | infinite}
reachable-time milli-seconds
retransmit-time milli-seconds
router-lifetime seconds
no shutdown