Alcatel-Lucent 7750 SR OS - Manual (Page 397)

Filter Policies
7750 SR OS Router Configuration Guide Page 397
The values depends on the encapsulation type configured for the interface. The following table
describes the allowed values for the port and encapsulation types..
Output Anti-spoofing Output — The following table describes the output for the command.
Sample Output
A:ALA-48# show filter anti-spoof
==================================================================
Anti Spoofing Table
==================================================================
SapId IP Address Mac Address
------------------------------------------------------------------
==================================================================
A:ALA-48# show filter anti-spoof
Port Type Encap-Type Allowed Values Comments
Ethernet Null 0 The SAP is identified by the port.
Ethernet Dot1q 0 — 4094 The SAP is identified by the 802.1Q tag on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
Ethernet QinQ qtag1: 0 — 4094
qtag2: 0 — 4094 The SAP is identified by two 802.1Q tags on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
SONET/SDH IPCP - The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
SONET/SDH
TDM BCP-Null 0 The SAP is identified with a single service on the
channel. Tags are assumed to be part of the customer
packet and not a service delimiter.
SONET/SDH
TDM BCP-Dot1q 0 — 4094 The SAP is identified by the 802.1Q tag on the channel.
SONET/SDH
TDM Frame Relay 16 — 991 The SAP is identified by the data link connection
identifier (DLCI).
SONET/SDH
ATM ATM vpi (NNI) 0 — 4095
vpi (UNI) 0 — 255
vci 1, 2, 5 — 65535 The SAP is identified by the PVC identifier (vpi/vci).
Label Description
SapID Displays the physical port identifier.
IP Address Displays the IP address.
Mac Address Displays the MAC address.