WIKA CF2S User Manual
Page 12
Operating Instructions Temperature Indicating Controller CF2S
V1.2
•
08/2004 - 12 -
: Options
+
:
Press the
key while the
key is being pressed.
+
3s:
Press the
key for approx. 3 seconds while the
key is being pressed.
+
+
3s: Press the
key for approx. 3 seconds
while the
and
keys are being pressed.
+
3s :
Pressing the
key, press the
key for approx. 3 seconds.
*1: Step rest time is indicated only during program control.
*2: If the Auto-tuning is performed, the mode reverts to the PV/SV display.
If the Auto-tuning is released, the mode will move to “Proportional band setting”.
*3: In the mode Program control change, if
is selected and the
key is
pressed, the display reverts to the PV/SV display mode.
Set the temperature setting of program in the Sub setting mode, Auxiliary fuction
setting mode 1 and 2.
+
+
3s
+
3s
[Auxiliary function setting mode 2]
[Program mode]
Scaling high limit
Alarm 1 (A1) hysteresis
Program control change
setting
setting
PV
PV
PV
*3
Scaling low limit
Alarm 2 (A2) hysteresis
Step 1 time setting
setting
setting
PV
PV
PV
PV filter time constant
Alarm 1 (A1) action
Step 2 time setting
setting
delayed timer setting
PV
PV
PV
Main output high limit
Alarm 2 (A2) action
Step 3 time setting
setting
delayed timer setting
PV
PV
PV
Main output low limit
Display selection when
Step 4 time setting
setting
control output off
PV
PV
PV
Main output ON/OFF
Main setting value
Step 5 time setting
action hysteresis setting
rising rate setting
PV
PV
PV
Alarm 1 (A1) action
Main setting value
Step 6 time setting
Energized/Deenergized
falling rate setting
PV
PV
PV
Alarm 2 (A2) action
Step 7 time setting
Energized/Deenergized
PV
PV