WIKA CF2S - Manual (Page 23)

Operating Instructions Temperature Indicating Controller CF2S
V1.2 • 08/2004 - 23 -
Step 1 Time setting Mode to set the Time for step 1.
Setting value 00.00
Minute indication
Hour indication
For example, when setting 1 hour 58 minutes,
set as [
].
Setting range: 00.00 to 99.59
[Factory adjusted as 00.00]
Step 2 Time setting Mode to set the Time for step 2.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
Step 3 Time setting Mode to set the Time for step 3.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
Step 4 Time setting Mode to set the Time for step 4.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
Step 5 Time setting Mode to set the Time for step 5.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
Step 6 Time setting Mode to set the Time for step 6.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
Step 7 Time setting Mode to set the Time for step 7.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
PV/SV display mode
Actual Main setting
temperature value