WIKA CF2S - Manual (Page 35)

Operating Instructions Temperature Indicating Controller CF2S
V1.2 • 08/2004 - 35 -
10.4 Mounting
• When using the One-touch type mounting bracket [code: FT]
Mounting panel thickness is 1 to 3mm.
Mount one-touch mounting bracket 1
to the body in advance, and then insert
the CF2S 2 from the front of the panel.
If Soft front cover is used the mounting panel
thickness will be 1 to 2.5mm.
[Fig. 10.4-1]
• When using the Screw type mounting bracket [code: FS]
Mounting panel thickness is 1 to 15mm.
Insert the CF2S from the front of the panel.
Slot the mounting bracket to the holes at the top and bottom of the case, and screw in place.
Notice
As the case is made of resin, do not use excessive force while
screwing in the mounting bracket.
The torque is approximately 0.12N•m.
[Fig. 10.4-2]
1
1
2